RODUCT DESCRIPTION
UHU twist & glue, the proven liquid All Purpose Adhesive in a soft and handy plastic bottle with the unique 3-position twistapplicator for glueing dots, lines and surfaces. Ideal for a wide range of applications at home, at school, in the office, for crafts and modelling, etc. The crystal-clear formula dries fast and washes out at 60 °C. Refillable. Allows easy and precise glueing made to measure.
FIELD OF APPLICATION
Universal - glues cardboard, paper, felt, leather, cork, fabrics, wood, metal, porcelain, glass, Styrofoam® and many plastic materials. Not suitable for photos, Polyethylene (PE) and Polypropylene (PP).
PROPERTIES
PREPARATION
Working Conditions:
Do not use at temperatures below +5 °C.
Surface Requirements:
Materials to be glued must be clean, dry and free of dust and grease.
Preliminary Surface Treatment:
When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first
APPLICATION
Directions for use:
Thoroughly clean the surfaces to be glued (dry and free of dust and grease). Use the black precision nozzle to apply dots of glue or to draw a thin line; twist in direction of the arrows, and the nozzle becomes an oval applicator for narrow and braod collages. Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! Washes out at 60 °C using regular detergent
Stains/residue:
The glue dissolves in alkaline detergents (e.g. heavy duty detergent). Stains in clothing can be removed by treating them generously with heavy duty detergent first and then washing the clothing at 60 °C (prewash program). Small stains can be removed with acetone.
Points of attention:
Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
TECHNICAL SPECIFICATIONS
| Chemical base: | Polyvinyl acetate copolymer |
| Colour: | Crystal clear |
| Consistency: | Liquid |
| Density approx.: | 0,92 g/cm³ |
| Drying/Curing time approx.*: | 2-5 minutes |
| Final bond strength: | 5 N/mm² |
| Final bond strength after: | 24 hours |
| Flash point: | K1 (<21°C) |
| Minimum application temperature: | 10 °C |
| Maximum temperature resistance: | 70 °C |
| Moisture resistance: | Limited |
| Rinseable with water: | Yes |
| Solvent: | Mixture of esters and alkohols |
| Viscosity: | Low viscosity |
| Viscosity approx.: | 1500 mPa·s |
| Washable: | Yes |
| Water resistance: | Nil |
* Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient temperatur
PHYSIOLOGICAL PROPERTIES
The dried adhesive is inert, completely neutral and physiologically indifferent.
PACK SIZES
35g, 90g
STORAGE CONDITIONS
Store in a dry, cool and frost-free place.
| Código de producto | 40451 |
| Fabricante | UHU |
| Condition | New |
RODUCT DESCRIPTION
UHU twist & glue, the proven liquid All Purpose Adhesive in a soft and handy plastic bottle with the unique 3-position twistapplicator for glueing dots, lines and surfaces. Ideal for a wide range of applications at home, at school, in the office, for crafts and modelling, etc. The crystal-clear formula dries fast and washes out at 60 °C. Refillable. Allows easy and precise glueing made to measure.
FIELD OF APPLICATION
Universal - glues cardboard, paper, felt, leather, cork, fabrics, wood, metal, porcelain, glass, Styrofoam® and many plastic materials. Not suitable for photos, Polyethylene (PE) and Polypropylene (PP).
PROPERTIES
PREPARATION
Working Conditions:
Do not use at temperatures below +5 °C.
Surface Requirements:
Materials to be glued must be clean, dry and free of dust and grease.
Preliminary Surface Treatment:
When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first
APPLICATION
Directions for use:
Thoroughly clean the surfaces to be glued (dry and free of dust and grease). Use the black precision nozzle to apply dots of glue or to draw a thin line; twist in direction of the arrows, and the nozzle becomes an oval applicator for narrow and braod collages. Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! Washes out at 60 °C using regular detergent
Stains/residue:
The glue dissolves in alkaline detergents (e.g. heavy duty detergent). Stains in clothing can be removed by treating them generously with heavy duty detergent first and then washing the clothing at 60 °C (prewash program). Small stains can be removed with acetone.
Points of attention:
Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
TECHNICAL SPECIFICATIONS
| Chemical base: | Polyvinyl acetate copolymer |
| Colour: | Crystal clear |
| Consistency: | Liquid |
| Density approx.: | 0,92 g/cm³ |
| Drying/Curing time approx.*: | 2-5 minutes |
| Final bond strength: | 5 N/mm² |
| Final bond strength after: | 24 hours |
| Flash point: | K1 (<21°C) |
| Minimum application temperature: | 10 °C |
| Maximum temperature resistance: | 70 °C |
| Moisture resistance: | Limited |
| Rinseable with water: | Yes |
| Solvent: | Mixture of esters and alkohols |
| Viscosity: | Low viscosity |
| Viscosity approx.: | 1500 mPa·s |
| Washable: | Yes |
| Water resistance: | Nil |
* Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient temperatur
PHYSIOLOGICAL PROPERTIES
The dried adhesive is inert, completely neutral and physiologically indifferent.
PACK SIZES
35g, 90g
STORAGE CONDITIONS
Store in a dry, cool and frost-free place.
| Código de producto | 40451 |
| Fabricante | UHU |
| Condition | New |
©2023 - 2025 rosamarcr.com - Todos los derechos reservados.
Todo el contenido de este sitio cuenta con derechos registrados, se permite el uso de imágenes y textos solamente mediante la autorización expresa.
